Fast Shipping Australia Wide - Friendly Service!!! Learn more

Steel Purlin Mount Anchor, Flat

SKU: AP123F

$125.52
Fast Onsite Delivery
30 Day Guarantee
100% Secure

Share

Description
RATING
  • Fall arrest – 15kN
  • Rope access – 12kN
MATERIALS
  • Anchor assembly – high grade 316 stainless steel
  • Penetration seal – EPDM rubber
DIMENSIONS
  • Total length – 165mm
  • Eyebolt – diameter 60mm OD, 35mm ID
  • Threaded rod – M16 x 100mm
  • Flange – 70mm
SUBSTRATE REQUIREMENTS
  • Minimum purlin size – 150 x 1.5mm
  • Minimum roof deck thickness – 0.42mm
  • Minimum of 3 purlins connected to roof deck
  • Less than 5 purlins require roof to be fastened to roof deck
  • Rope access use requires 2 x 14g self-drilling screws through the roof sheet into the purlin on which the anchor is attached and to the purlin above/below the anchor
COMPLIANCE

LOW-PRO AP123.10 Steel Purlin Mount Anchor is designed and manufactured in accordance with requirements of Standards AS/NZS 1891.4:2009 and AS/NZS 5532:2013 and relevant statutory OHS Codes of Practice/Guidelines.

PRODUCT WARRANTY

10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

INSPECTION AND MAINTENANCE

Inspection and certification required every 12 months by competent height safety system inspector in accordance with manufacturer’s specifications and requirements of Australian Standards AS/NZS 1891.4:2009 Section (9).

IMPORTANT NOTE

Failure to supply and/or install propriety product in accordance with above Standards and codes, specifications and instructions voids complete system certification and/or warranty.

Specifications
SKU AP123F
Brand LOW-PRO
Be The First To Review This Product!

Help other Industroquip Safety users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category