Fast Shipping Australia Wide - Friendly Service!!! Learn more

ALTO™ Modular Aluminium Safe Access Step Ladder Only - 1000mm

SKU: ST570M.1000

$1,446.00
Fast Onsite Delivery
30 Day Guarantee
100% Secure

Share

Description
ALTO MODULAR STEP LADDER ONLY
  • Heights – 1000mm (ST570M.1000), 2000mm (ST570M.2000), 3000mm (ST570M.3000), 4000mm (ST570M.4000), 5000mm (ST570M.5000)
  • Includes mounting brackets
DESCRIPTION

Robust, lightweight ALTO Step Ladders are ideal for Roof Top Access and safe access over machinery and dangerous areas for personnel & equipment.

ALTO Step Ladders are manufactured using structural grade aluminum extrusion and are rated at 150kg for single-person use across industrial and commercial applications. They are designed as lightweight modular sections allowing flat-pack delivery to the site and simple assembly. 

NOTE
  • Allow  2- 3 working days lead time for step ladders manufactured to specific height requirements.
  • Manufactured to a 65° angle.
  • LD407 retractable stiles can be retrofitted.
WARNING
  • Step ladders are fabricated to the specific height required.
  • Suitable roof lead-on fall protection must be provided.
  • A fall protection cage is recommended above 3.5M.
MATERIALS
  • All ALTO Modular Step Ladder componentry and accessories manufactured from high grade structural aluminium with options for powder coating.
DIMENSIONS
  • Maximum height – 5.0m
  • Overall ladder width – 686mm
  • Distance between handrails – 560mm
  • Step size – 600mm (L) x 100mm (W) x 38mm (H)
  • Step spacing – up to 300mm
  • Stile extension above landing surface – 1000mm
  • Minimum clearance behind ladder – 150mm
  • Angle of slope – 65°
FIXINGS
  • Steel purlin (min 2.0mm) / M10 S/S bolt or M8 toggle bolt or 14G tek screw
  • Steel structure / M10 S/S bolts
  • Concrete (min 25MPa) / M10 tru-bolt or M8 screw bolt
  • Brick / M8 Screw Bolt
  • Composite Panel / M10 through bolt or M8 toggle bolts
    (Refer instruction manual)
WORK LOAD LIMIT
  • Recommended for single person use – 150kg rated.
  • Industrial rated, suited to high frequency usage.
  • Support structure integrity, suitability and fixing method to be assessed and determined by a engineer unless it is clear to a competent person prior to installation.
COMPLIANCE

ALTO Modular Step Ladder System is designed to comply with requirements of Australian Standard AS1657:2018 and relevant statutory WHS Codes of Practice/Guidelines. Slip resistance testing to AS4586:2013 (Rating – R11).

TESTING

Testing and performance of ALTO Step Ladder Systems based on requirements of Australian Standard AS1657:2018.

PRODUCT WARRANTY

ALTO Modular Step Ladder Systems are warrantied for 10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

INSPECTION AND MAINTENANCE

Inspection and certification of ALTO Modular Step Ladder Systems is required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Australian Standards AS1657:2018 and AS/NZS 1891.4:2009 Section (9). (Refer instruction manual.)

IMPORTANT NOTE

Failure to supply and/or install ALTO Modular Step Ladder systems in accordance with above standards and codes, specifications and instructions voids complete system certification and/or warranty.

Specifications
SKU ST570M
Brand Alto
Be The First To Review This Product!

Help other Industroquip Safety users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category